CONCET ES Accelerating & water-reducing admixture employs the latest advancements in polycarboxylate technology and is formulated to meet the demands of the precast/pre-stressed concrete industry. It maximizes cement efficiency, maintains consistent air c

It improves the plastic and hardened properties of concrete such as workability, compressive and flexural strengths.

It is compatible with air entraining agents, but should be dispensed separately into the concrete mi

Technical Information
Appearance Brown colour liquid
Base Polycarboxylate Ether
Air content <1%
Specific gravity: 1.04± 0.02
pH value: Minimum 6
Chloride content (%): Nil
Storage: Under shade
Shelf life:: 12 months

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

Generally dosed in the range of 0.5 to 1.0% by weight of cementitious materials. But go for trial mix for finalizing the dosages. Various types and higher grades of concrete more than M 45. Recommended to use 300-600 ml per 50 kg of Cement

Higher dosages are acceptable with prior testing and confirmation of the desired performance with specific materials being used.

CONCET ES should be added to the initial batch water when possible. It should not come in contact with dry cement or other admixtures until mixed thoroughly with the concrete batch.

Field testing is strongly recommended to optimize dose range and performance expectations with local materials. CONCET ES is compatible with most admixtures including air-entraining agents, accelerators, most water-reducers, retarders, shrinkage reducers, corrosion inhibitors, viscosity modifiers, and microsilica; however each material should be added to the concrete separately.