CONCET LR PRO is a synthetically produced liquid water-reducing and set retarding admixture. It contains a Strength Enhancing chemistry component and does not contain calcium chloride or other potential corroding materials, and may be used in the presenc

It is compatible with air-entraining agents, water reducers and calcium chloride, but they must be added separately to the mix.

Technical Information
Appearance Brown colour liquid
Base Polycarboxylate Ether
Air content <1%
Specific gravity: 1.03 ± 0.04
pH value: Minimum 6
Chloride content (%): Nil
Storage: Under shade
Shelf life:: 12 months

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

Generally dosed in the range of 0.6 to 1.3% by weight of cementitious materials. But go for trial mix for finalizing the dosages.

Higher dosages are acceptable with prior testing and confirmation of the desired performance with specific materials being used.

CONCET SP FLOW should be added to the initial batch water when possible. It should not come in contact with dry cement or other admixtures until mixed thoroughly with the concrete batch.

Field testing is strongly recommended to optimize dose range and performance expectations with local materials. CONCET SP FLOW is compatible with most admixtures including air-entraining agents, accelerators, most water-reducers, retarders, shrinkage reducers, corrosion inhibitors, viscosity modifiers, and microsilica; however, each material should be added to the concrete separately.