Description

CONCET MR PRO is a polycarboxylate based plasticizing admixture for concrete which is flexible enough to use as an ASTM C 494 Type A and Type D water reducer.

It is a mid-range/high-range water reducing and plasticizing admixture for concrete. It shows improved finishing characteristics when compared to othe

This mid-range approach to water reducing admixtures allows for a wide range of usable dosage rates

Technical Information
Appearance Brown colour liquid
Base Polycarboxylate Ether
Air content
Specific gravity: 1.06 ± 0.02
pH value: Minimum 6
Chloride content (%): Nil
Storage: Under shade
Shelf life:: 12 months
DIRECTIONS FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.


Generally dosed in the range of 0.5 to 1.0% by weight of cementitious materials. But go for trial mix for finalizing the dosages


Higher dosages are acceptable with prior testing and confirmation of the desired performance with specific materials being used.


CONCET MR PRO should be added to the initial batch water when possible. It should not come in contact with dry cement or other admixtures until mixed thoroughly with the concrete batch


Field testing is strongly recommended to optimize dose range and performance expectations with local materials. CONCET MR PRO is compatible with most admixtures including air-entraining agents, accelerators, most water-reducers, retarders, shrinkage reducers, corrosion inhibitors, viscosity modifiers, and microsilica; however,each material should be added to the concrete separately.